What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 21:41

This is where the MOV conducts again, and dissipated the energy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
I post the exact comment here.
What are some examples of a threat to democracy in India?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are three different concepts here that are getting confused.
Why is it called iOS 26? What happened to iOS 19 for iPhone - 9to5Mac
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
One is “what exactly is in a ‘surge protector’ ? ”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
These devices are installed between the “hot” and “neutral” and protective ground.
How do the youth in Taiwan perceive their national identity in relation to China?
a photo is worth a thousand words.
So, the voltage could go up to 500 volts, and the fuse will not open up.
At least they know the answer if they wanted it.
There are two important concepts here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
eight
It also is a device that limits the change in current flow.
Why do creationists ask for proof of evolution and then ignore the answers?
Because the load is inductive, the current lags the voltage.(by a bit).
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Can you tell me a depressing story?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Upvotes:
2024–10–10[John johnson John Johnson ]
What steps can be taken to track down a scammer and determine their location?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Barnstars:
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
One
Why do I feel sleepy after massage?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
These are simplified answers to the original question, and does not change anything I wrote above.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Do you suck dicks with no reciprocation?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Is the Donald Trump Bible any different from a regular Bible? Has Trump altered its contents?
(Dc diagram shown, AC is similar).
In schematic diagrams this is the symbol for a fuse:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Is it okay for a wife who comes home from a date to tell her husband what she did?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What does a fuse do?
Here is a simplified AC power diagram.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
nine
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but I think this circuit , shows a few more pieces.
First Sentence:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This one hit behind the barn.
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This device then solves the entire problem.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then asserts :
This is the picture of an electronic coil of wire wound around a core of magnetic material.
so, what happens?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
the problem then depends on "how fast does the fuse operate?".
What is lightning?
An AC voltage/ current source, and an ac inductive load.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The third is lightning and “how it gets conducted into a home.”
This is 'the assistant's answer'
A circuit breaker is similar, but is resettable.
The other is “what does a “fuse” do?”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The bolt then partially travels down the line to your home.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
[old diagram got deleted by accident]
He then describes the function of a fuse.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Edit 2024–10.
2024–10–16 [ OO OLAOYE OYEBODE ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Now when you have a certain ac resistance, then a current flows in a loop.